server-preference (dhcpv6-server-policy-config)

Configures this DHCPv6 server‘s preference value. When configured, the server preference value is included in the DHCPv6 server‘s replies to IPv6 clients.

Supported on the following devices:

Access Points: AP3000/X, AP5010, AP310i/e, AP410i/e, AP505i, AP510i, AP510e, AP560i, AP7602, AP7612, AP7622, AP7632, AP7662, AP8163, AP8533.
Service Platforms: NX5500, NX7500, NX9500, NX9600
Virtual Platforms: CX9000, VX9000

Syntax

server-preference <0-255>

Parameters

server-preference <0-255>one


server-preference <0-255>	Configures this DHCP server‘s preference value <0-255> – Specify a value from 0 - 255.

Examples

nx9500-6C8809(config-dhcpv6-server-policy-test)#server-preference 1

nx9500-6C8809(config-dhcpv6-server-policy-test)#show context
dhcpv6-server-policy test
 option DHCPServerOption1 10 ascii 50
 dhcpv6-pool DHCPv6Pool1
  network 2002::/64
  domain-name TechPubs
  sip domain-name TechPubsSIP
  dns-server 2002::1
 server-preference 1
 restrict-vendor-options
nx9500-6C8809(config-dhcpv6-server-policy-test)#

Related Commands


no (dhcpv6-server-policy-config)	Removes this DHCPv6 server‘s preference value